Dnf-controls Analyst, RS422/RS232 Tester With (LOG 1) SR Data L Manual de usuario descargar pdf (Pagina 10)

Page 6 of 27 The Analyst RS422/RS232 Tester

E. Cable & Signal Path Testing

Use SENDER and RECEIVER Modes for cable and signal path testing.

1) From the MAIN Screen, press the [Menu] key.

2) Press the [In] and [Out] keys to toggle between RS422 and RS232. Select either

RS422 or RS232 to match the cable or signal path being tested.

3) Press the [Exit] key to exit the MENU Screen.

4) Press the [SEND] key to select SENDER mode.

5) Connect The Analyst RS422/RS232 Tester as follows.

Cable or signal path being tested

Analyst Tester at far end of cable

or signal path

Analyst Tester in operator’s hands

Using TWO Analysts:

(

RS422 Shown

)

nal

st Tester in o

erator’s hands

Using ONE Analyst:

(RS232 Shown)

Cable or signal path being tested

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 30 31

Sin comentarios

Dnf-controls Analyst, RS422/RS232 Tester With (LOG 1) SR Data L Manual de usuario Pagina 10